Usb Board - HP Pavilion 15-bc300 Maintenance And Service Manual

USB board

Description
USB board for use in models 15-dp0000~15-dp0999
USB board for use in models 15-bc300~bc399, 15-bc400~bc499
USB board cable for use in models 15-dp0000~15-dp0999
USB board cable for use in models 15-bc300~bc399, 15-bc400~bc499
IMPORTANT:
and replacement
Before removing the USB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the base enclosure (see
3. Disconnect the cable from the battery (see
Remove the USB board:
1. Disconnect the USB board cable from the zero-insertion force (ZIF) connector (1) on the USB board.
2. Disconnect the cables from the two ZIF connectors on the USB board (2) and (3).
3. Remove the Phillips M2.0 × 4.0 screw (4), and then lift the USB board to remove it (5).
Reverse this procedure to install the USB board.
Make special note of each screw and screw lock size and location during removal
Base enclosure on page
(Preparation for disassembly on page
34).
Battery on page 36).
Spare part number
L42997-001
L06098-001
L42994-001
856729-001
34).
Component replacement procedures 49