Power Button Board - HP Pavilion 15-bc300 Maintenance And Service Manual

Power button board

Description
Power button board for use in model numbers 15-dp000~0999
Power button board for use in model numbers 15-bc300~399, 15-bc400~499
Power button board cable
IMPORTANT:
and replacement
Before removing the power button board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the base enclosure (see
3. Disconnect the cable from the battery (see
4. Remove the hard drive (see
5. Remove the USB board (see
6. Remove the display (see
Remove the power button board:
▲ Remove the broad head Phillips M2.0 × 2.0 screw (1), lift the power button board at an angle (2), and
then remove it (3).
Reverse this procedure to install the power button board.
66 Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Base enclosure on page
Hard drive on page
USB board on page
Display assembly on page
(Preparation for disassembly on page
34).
Battery on page 36).
39).
49).
58).
Spare part number
L42998-001
858974-001
858966-001
34).