19
33
34
Step 8:
Attach the Nylon Strap (32) to the Strap Lock (34) by inserting the end of the
Nylon Strap (32) up through the bottom of the Strap Lock (34), loop the Nylon
Strap (32) over the Pre-assembled Loop Strap (33) and down through the Strap
Lock (34). Then loop the strap back over itself, and insert back through the Strap
Lock (34), and pull tight to secure. See Diagram above.
Step 9:
Attach the Nylon and Loop Straps (32, 33) to the inversion table by hooking the
end of the Nylon Strap (32) to the loop on the back of the Bed Frame (4) as shown.
Then hook the other end of Loop Strap (33) to the other Pre-assembled loop on
the Front U-Frame (1) as shown above.
ASSEMBLY
32
19
15
34
33
32
19
19