Seastar Solutions HC5370-3 Installation Instructions Manual page 4

Prior to every use
During use
After use
Maintenance
ii
Safety Information Continued
1. Check Fluid level in highest helm pump (see page 12 for proper
fluid level setting).
2. Verify immediate steering response when turning steering wheel(s).
(Ensure drive(s)/rudder(s) turns when steering wheel is turned.)
3. Visually inspect all steering hoses and fittings for wear, kinking
and/or leaks.
4. Check for binding, loose, worn or leaking steering components.
5. Ensure operator(s) have taken an 'accredited boating course'.
DO NOT OPERATE BOAT IF ANY COMPONENT IS NOT IN PROPER
WORKING CONDITION.
1. WEAR A COAST GUARD-APPROVED PERSONAL FLOTATION
DEVICE (PFD).
2. ATTACH ENGINE SHUT-OFF CORD (LANYARD) TO YOUR PDF.
3. Never allow anyone not familiar with the operation of the
steering system operate the boat at any time.
4. Know and adhere to the operator restrictions for your area
including;
- Federal Laws/Regulations,
- State Laws/Regulations and
- Municipal Laws/Regulations.
DO NOT OPERATE BOAT IF ANY COMPONENT IS NOT IN PROPER
WORKING CONDITION.
1. Rinse off steering system thoroughly using 'fresh, clean water only'.
- Cleaning fluids containing ammonia, acids or any other corrosive
ingredients MUST NOT be used for cleaning any part of the
hydraulic steering system.
1. Maintain steering system at a minimum of twice per year.
- See Routine Maintenance, page 13 of this manual.
Keep our waters clean for all current and future users. Dispose of
ALL fluids in accordance with your local regulations.
BayStar/SeaStar Hydraulic Steering