Seastar Solutions HC5370-3 Installation Instructions Manual page 15

Twin Station Single Cylinder
• Perform steps 1 through 5 at
station no. 1.
• Then repeat steps 1 - 5 at
station no. 2.
• Oil requirements 4 - 5 bottles.
Single Station Twin Cylinder
• When performing steps 1
through 5, perform
instructions in each step first
on cylinder no. 1 and then on
cylinder no. 2, before
proceeding to the next step.
ie: Perform instructions
referring to right side of
cylinder first on cylinder no. 1
and then on cylinder no. 2.
• Oil requirements 4 - 5 bottles.
Twin Station Twin Cylinder
• Follow same procedure as
instructed for single-station/
twin-cylinders, beginning at
station no. 1, and repeat entire
procedure at station no. 2.
Side Mount & Splashwell Mount Cylinders
Refer to
NOTICE
Oil Level and System
Check on page 12.
Figure 13.
Refer to
NOTICE
Oil Level and System
Check on page 12.
CYLINDER NO.2
Figure 14.
CYLINDER NO.2
Figure 15.
HYDRAULIC STEERING
FILLING AND PURGING
STATION NO.2
STATION NO.1
CYLINDER NO.1
STATION NO.2
STATION NO.1
CYLINDER NO.1
11