Ear-Clip: Attaching The Ear Clip To The Headset - Cardo Systems allways Manual

• Insert the ear loop ratchet into the
holding duct on the back of the Headset
(Fig a.)
• Determine the height of the loop by
adjusting the depth to which you insert
the ratchet into the holding duct (FIG. a).
with the objective to insert speaker into
the outer part of your ear channel.
(Fig b and c.)
.
• Hold the headset as shown in FIG.b and
push with your pointing finger against
the flexible curvature to create an opening
between ear-loop and speaker as shown
in FIG c. While continuing to push against
the curvature
Speaker
• place the ear-loop around your ear as
shown in FIG d. and fasten it to achieve
a steady and comfortable grip.
• Insert the speaker into the ear, just as
deep as you feel comfortable with.
Alternatively, you may also choose to bend
open the loop and then strap it around
your ear until you accomplish a
comfortable fit as shown in FIG. e and f.
FIG. g
• You can wear the Headset on the left
of the right side of your head by inserting
the ratchet accordingly (FIG g).
Note:
The location of the control buttons
changes relative to the side of the head you
have chosen to wear the Headset. If you use
your left ear, the volume and Mute/Set buttons
will be on the bottom part of the Headset.If
you use your right ear, the volume and Mute/Set
buttons will be on the upper part of the Headset.
5.4.1 The Eye/Sun-glass attachment
The Eye/Sun-glass attachment (the "Clip")
fits a wide range of arms. The optimal
location to attach the Clip on the arm of
your Eye/Sun-glasses is where it positions
Getting Started
Headset Manual 13