Using The Headset; Attaching And Removing The Headset From The Helmet Clamp; Audio Sources And Priorities - Cardo Systems SCALA RIDER FM User Manual

Hide thumbs Also See for SCALA RIDER FM:
Table of Contents

Advertisement

case, you should tuck away the
long corded speaker underneath
the helmet padding as follows:
Lead the speaker cord [B]
alongside the rim of the padding
to the right side and then back
to the left side, near speaker
[A]. Then place the speaker [B]
underneath the padding.
ATTACHING AND REMOVING THE
HEADSET FROM THE HELMET CLAMP
ATTACHING:
Slide the headset downwards along
the sliding panel until a clicking sound
indicates that the headset is locked in
place.
REMOVING:
Your headset can be removed for
charging and storage by pressing your
finger gently against the tab and sliding
the headset up with the other hand.
We recommend that you remove the
headset from the helmet when not in use.

AUDIO SOURCES AND PRIORITIES

The different Audio Sources that are connected to the scala rider FM
are prioritized as follows:
Cable
Speaker B
Speaker B
Speaker A
Press here
to remove
Highest: 1. Mobile phone audio (Incoming/outgoing calls) / GPS
device (GPS audio and navigation instructions)
2. FM Radio
Lowest 3. MP3 Connectivity
A high priority Audio Source will always interrupt any lower priority
Audio Source. i.e. Mobile phone call overrides FM radio

USING THE HEADSET

GENERAL USAGE
GENERAL FUNCTIONS
DESIRED RESULT:
REQUIRED ACTION:
Turn on the
Press the CTRL Button steadily for at least three
headset
seconds. Led indication: three blue flashes.
Audio feedback: Ascending tone (low-high).
Turn off the
Press the CTRL Button steadily for at least three
headset
seconds. Led indication: three red flashes.
Audio feedback: Descending tone (high-low).
Increase the
Tap the Volume Up Button
volume
Decrease the
Tap the Volume Down Button
volume
AGC (Automatic Gain Control): In addition to manual Volume Control,
the scala rider FM will automatically increase and reduce its volume
according to ambient noise and driving speed.
INITIATING AND RECEIVING MOBILE
PHONE CALLS
Voice Recognition – VR (VOX)
The VR feature allows you to answer or reject incoming calls by voice
scala rider
FM
7
®

Advertisement

Table of Contents
loading

Table of Contents