Fitting The Ear Clip With The Headset To The Ear; Eye-Glass Clip: Attaching The Eyeglass Clip To The Headset; Fitting The Eyeglass Clip To The Eye- Or Sunglasses - Cardo Systems allways Manual

Getting Started
the Headset's speaker so it protrudes
exactly into your the ear-channel.
5.4.2 The Eye/Sun-glass attachment
The position of the Eye/Sun-glass
attachment, or "Clip" should be fixed
on the arm of the glasses, so it allows the
Headset's speaker to protrude slightly into
the ear-channel (FIG d).
• Insert the Clip's ratchet into the holding
duct on the back of the Headset (FIG a)
ratchet
FIG a
1. Insert ratchet
into holding
duct
14 †Headset Manual
Holding duct
2. Push lever and snap open Clip
onto the arm
3. Slide open clip
alongside the arm
FIG c
• Determine the height of the Headset
relative to the glasses by adjusting the
depth to which you insert the ratchet into
the holding duct (FIG a).
• Once you have inserted the Clip into
the holding duct, attach the entire Headset
by sliding the Clip from front to back
along the arm of the Eye/Sun-glasses until
the speaker hovers above the inner cavity
of your ear (FIG c). Then insert the speaker
slightly into the ear-channel to achieve a
comfortable fit.
Placing the Headset on the left or on
the right side
You can wear the Headset on the left or
the right side of your head by inserting
the ratchet accordingly (FIG b)
FIG b
FIG d