Troubleshooting - Cardo Systems allways Manual

TROUBLESHOOTING

13. Troubleshooting
Problem
Pairing fails
Can't answer phone calls or
perform voice dialing (assuming
your mobile phone supports this
feature)
Battery does not provide 5-6
hours talk time.
30 †Headset Manual
Action
1. Turn off both devices IMPORTANT!
2. Turn on Headset
3. Activate pairing mode at Headset
4. Turn on mobile phone (and BT Adapter if used)
5. Activate pairing mode at mobile phone (and
BT Adapter if used)
6. When asked by mobile phone to replace existing
Headset, select YES.
1. Make sure your allways
ON and in standby mode while the blue light
indicator flashes slowly.
2. Verify that the Bluetooth™ function on your
phone is set to ON.
3. Verify that the allways
paired Headset to your mobile phone (refer to
phone manual)
4. Link the Headset to the phone as described
above
5. Check Definitions or Settings on your mobile
phone.
6. Perform pairing process and check again.
1. Make sure your allways
charged. Charging time is up to 3 hours for an
empty battery. When fully charged and charger
is connected to Headset, the light indicator emits
steady blue light.
2. When not wearing the allways
make sure the CTRL button is not pressed.
3. When used with the BT Adapter in Normal
Mode, make sure you close the connection by
pressing the CTRL button after every call.
Headset is turned
™
Headset is the correctly
™
Headset is fully
™
Headset,
™