Ending Calls; Voice Dialing; Volume Control; Mute/Set - Cardo Systems allways Manual

Getting Started
transfer audio to the Headset. Besides trial
and error attempts, you may wish to visit
our website to find out how best to
configure your particular mobile phone.
6.3 Terminating Calls
To terminate a call, press briefly the CTRL
button. A sound will be heard, confirming
the disconnection. Wait at least three
seconds before you can press the CTRL
button again to place a new call.
Alternatively, you can terminate a call by
using the END key of your mobile phone.
Doing so, will automatically terminate the
audio connection between the Headset
and mobile phone. If the other party
terminates the call, no further action on
your part is required.

6.4 Voice Dialing

This feature is only available with mobile
phones equipped with voice activation
technology. To use voice activation you
must first assign voice tags to the desired
parties listed as your contacts in your
mobile phone (if you are not familiar with
this procedure, please refer to the manual
of your mobile phone).
While your phone is ON but no call is in
progress and the phone is not ringing,
press the CTRL button briefly and a short
beep will be heard. After the beep,
pronounce the name of the party you
wish to call and wait for feedback from
16 †Headset Manual
the phone. The type of feedback depends
on your phone (voice confirmation or no
confirmation).

6.5 Volume Control

You can adjust the volume on the
allways Headset by pressing the left or
™
right volume buttons to increase/decrease
volume. Every press - followed by a short
beep - changes the audio level. When
volume is at the maximum/minimum,
beeps are not heard. Continuous pressing
on the volume button will continuously
increase/decrease the volume.

Mute/Set

Button
6.7 Mute Function
While a call is in progress, press briefly
the MUTE/SET button. You will hear a
tone indicating that you are in Mute mode,
during which you continue to hear the
other party, but your voice will not be
heard on the other end. Press the
MUTE/SET button again to cancel Mute
mode.
Volume
Control