Reading Indicators Of The Headset; Visual; Audio; Explanatory Chart - Cardo Systems allways Manual

VISUAL INDICTORS
7. Understanding the Indicators of the allways
Visual Indicators
Light indicator blinks red and blue
(every 3-5 seconds)
Light indicator flashes rapidly in blue
Light indicator flashes slowly in blue
Light indicator shows steady red
Light indicator shows steady blue
Audio Signals from the Headset
Increasing tones
Decreasing tones
Two short beeps
Ringing tones
Other audio tones
18 †Headset Manual
™
Low Battery
allways™ is in pairing mode
allways™ is paired to a mobile phone. Same
indication is shown even if the other device is
turned off.
allways™ is being charged and battery is not
yet fully charged.
allways™ is connected to charger and battery
is fully charged.
Every depression of the Control button will
generate a brief sound to be heard on the
Headset.Every increase/decrease on the volume
button is followed by a short beep. If volume can
not be further increased/ decreased, no beeps will
be heard.
Indicates that Headset is being turned on
Indicates that Headset is being turned off
Two beeps are sounded when activating
Mute/Set option, i.e. the other party will not
hear you until you cancel Mute/Set.
The mobile phone releases ringing tones which
are transferred to the Headset. Different ringing
tones will be heard subject to the model and
setting of the mobile phone.
While performing voice dialing, the phone
prompts you by means of a sound, indicating
that you ought to pronounce the name of party
you wish to call. Please refer to your mobile
phone manual for more information.
Headset