Uninstalling Communication Engineering Tool - ABB COM600 Station Automation Series User Manual

COM600 3.2
3.6.
30
COM600 Station Automation Series
User's Guide
To run CET using a different user account than COM600 in the configuration computer:
1. Add the COM600 user to the configuration computer as described above.
2. Add the new configuration user to COM600 computer with administrator rights and
with the same password as in the configuration computer.
3. Configure the DCOM permissions for the new user in the COM600 computer as
described below.
DCOM settings are used to define permissions to use the COM600 computer.
To start the DCOM configuration:
1. Select Start > Settings > Control Panel > Administrator Tools > Component
Services or run the command dcomcnfg. The Component Services dialog opens.
2. Browse to My Computer and right-click the My Computer icon. Select Properties
from the shortcut menu.
3. Select Default COM Security tab from the My Computer Properties dialog.
4. Created user account must be added to both access permissions and launch permis-
sions.
To add permission:
1. Click Edit Default. The permission dialog opens.
2. Select the user you want to give a permission to use the COM600 computer.
3. Click Add and then OK.
4. Mark the check boxes for local and remote access, launch and activation.
After changing the settings it is recommended to restart both computers to activate the
changes.

Uninstalling Communication Engineering Tool

To uninstall CET:
1. Open the Add or Remove Programs dialog by selecting Start > Settings > Control
Panel > Add or Remove Programs in the Windows task bar.
2. Select Communication Engineering Tool and click Remove.
Note that this uninstallation only removes the Communication
Engineering Tool so that you can install a new version and
update the software. It does not remove the Microsoft SQL
Server and .Net Framework. Removing these programs may
infect the functionality of other ABB applications installed
on your PC.
1MRS756125