Grouping Alarms - ABB COM600 Station Automation Series User Manual

COM600 3.2
4.3.6.
42
COM600 Station Automation Series
User's Guide
Figure 4.3.5.2-1 An example of object properties of events

Grouping Alarms

Alarms can be grouped together using the Group Alarm Configurator tool.
To create an alarm group:
1. Create virtual Application OPC server.
2. Create Virtual Subnetwork.
3. Create Virtual IED.
4. Create Virtual LD.
5. Create LN.
6. Create GroupAlarm SPS object
If you are going to create several Group Alarm objects, you should rename each
with a unique name within LN.
7. Open Group Alarm Configurator.
Drag and drop the data objects, which shall belong to the alarm group to Group Alarm
Configurator tool. You can use data objects from any of the OPC servers of COM600.
The data objects of following types can be used as a member of alarm group: ACD,
1MRS756125
ScaleDefObjProp.jpg