1MRS756125
3.7.
COM600 Station Automation Series
User's Guide
Turning off COM600 computer
If a local display, keyboard and mouse are connected to the COM600 computer:
1. Press CTRL+ALT+DEL and choose Shutdown from the dialog.
2. Wait until the It is now safe to turn off your computer message appears on the
display.
3. Press and hold the front panel power button for a few seconds until the SYS led on
the front panel turns off.
If the remote desktop session is active:
1. Run the shutdown.bat located in the C:\ of the COM600 computer.
2. Wait for about 30 seconds. Then press and hold the front panel power button for a
few seconds until the SYS led on the front panel turns off.
If no desktop is available, press and hold the front panel power button for a few seconds
until the SYS led on the front panel turns off.
To turn on the COM600 computer, press the power button briefly.
COM600 3.2
31