View System Alarms
1.
To display the
Each row in the table displays the time and date that an alarm occurred, the type of alarm, and a brief
statement indicating its cause.
2.
You can click on the Refresh Rate drop-down list to select a recurring time interval after which the
page will redisplay with new data.
Diagnostics
1.
To perform diagnostics on specific ATM VC, select Admin > Diagnostics.
2.
From the WAN Interface drop-down list, select the interface on which you want to execute
diagnostics. Note that only the interfaces defined in the system will appear on the drop-down list.
3.
Click [Start Test]. The diagnostic result will displayed on this page.
Rev:01_040220
Alarm
page, select Admin > Alarm.
Chapter 4: Advanced Configuration
67