Rvs Com Lite; Welcome To Rvs-Com Lite; Operating Requirements - Siemens I-SURF User Manual

Siemens user guide network adapter i-surf
Table of Contents

Advertisement

9. RVS COM Lite

9.1 Welcome to RVS-COM Lite

It's simple and easy to use RVS-COM Lite to manage all your important
communications tasks without fuss or bother. RVS-COM is fully compatible with
most popular communications devices and services and lets you start as soon as
you have installed the program.
RVS-COM Lite may only be distributed in conjunction with a communications
device. Please inform us if you purchased RVS-COM Lite without any hardware, as
this software may not work properly with the hardware you are using.
RVS-COM Lite provides you with the most important functions of RVS-COM
Standard. Some functions, however, are not included or are limited. If you need
these functions then use the opportunity to upgrade for a low price.

9.2 Operating Requirements

Operating system: Microsoft Windows 95, Windows 98 or
Windows NT 4.0
PC/CPU: IBM AT-type PC with Intel-compatible CPU 486 DX 66
(Pentium recommended).
SoftwareFax reception at 14,400 bps and RVS Softmodem require a
Pentium-type CPU (Pentium 133 recommended).
RAM: 8 MB minimum for Windows 95 (16 MB recommended), 16 MB
minimum for Windows 98 and NT (24 MB recommended)
Hard disk space: 25 MB before installation. There should be at least
16 MB available on the hard disk for virtual memory when running the
program.
Graphics card: At least 640*480, 16 colour VGA display
CD-ROM drive is required for the installation of RVS-COM Lite.
You will need a full-duplex-capable audio device (sound card) for
telephony.
RVS-COM Lite is designed for your communications device. To install this, please
see the manufacturer's instructions for the device. Some communications devices
require special driver programs supplied by the manufacturer. If this applies to your
device, then please install these driver programs according to the manufacturer's
instructions.
If you are using an ISDN router with RVS ISDN DCP, the CAPI is installed with
RVS-COM Lite. Please refer to the README.RTF file in the root directory of your I-
Surf USB CD.
9. RVS COM Lite
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

I-surf usb 2

Table of Contents