Table of Contents
Advertisement
6. Installation and Configuration under Windows 98
6.2 Uninstalling
To remove the device driver software and the ISDN utilities from your computer, you
need to start the Uninstall program:
Program Files/I-Surf USB Utilities/Uninstall
You need to reboot your computer after uninstalling.
6.3 Uninstalling Version 1.0
If you have installed the Windows 98 device driver for Version 1.0 of I-Surf USB,
you must first uninstall this version. You may start the required Uninstall program
(rem_drv_old.exe) from the installation menu of the new CD-ROM.
The program will first check if Version 1.0 of I-Surf USB is present, and uninstall this
device driver if found. The PC is then rebooted, and installation of the current
version continues.
The Uninstall program rem_drv_old.exe can only be used for Version
1.0 of the I-Surf USB driver. Different drivers will be ignored.
6.4 Device Driver Update
The device driver is updated by uninstalling the current installation. Once the PC
has been rebooted, the ISDN Adapter hardware is again detected, and the device
driver installation process is activated.
22
Advertisement
Table of Contents
