Baud Rate Selection - Allen-Bradley 1747-SN User Manual

3–2 Installation and Wiring

Baud Rate Selection

Publication 1747 6.6 - July 1996
Below are supported baud rates and switch positions:
Baud Rate
57.6K baud
115.2K baud
230.4K baud
230.4K baud
The figure below shows the location of the DIP switches on the
scanner. Also, the DIP switch settings are shown for each baud rate.
Important:
For proper RIO link system operation, all devices must
be configured for the same baud rate.
Baud Rate
DIP Switch
57.6K baud 115.2K baud
230.4K baud 230.4K baud
This is the default position as shipped from the factory.
DIP Switch Position
Switch 1 Switch 2
on on
on off
off on
off off