Compliance to European
Union Directives
Installation and Wiring
This chapter contains the information necessary to:
select the baud rate
insert the scanner into the SLC chassis
wire the RIO link
power up the scanner
If this product has the CE mark it is approved for installation within
the European Union and EEA regions. It has been designed and
tested to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards,
in whole or in part, documented in a technical construction file:
EN 50081-2
EMC – Generic Emission Standard, Part 2 – Industrial
Environment
EN 50082-2
EMC – Generic Immunity Standard, Part 2 – Industrial
Environment
This product is intended for use in an industrial environment.
3
Chapter
Publication 1747 6.6 - July 1996