Editing G File Data
Data in the G file must be edited according to your application and
the requirements of the specialty I/O module. You edit the data
offline under the I/O configuration function only. With the decimal
and hex/bcd formats, you edit data at the word level:
G1:1 = 234 (decimal format)
G1:1 = 00EA (hex/bcd format)
With the binary format, you edit data at the bit level:
G1/19 = 1
Important:
Word 0 of the G file is configured automatically
by the processor according to the particular
specialty I/O module. Word 0 cannot be edited.
M0–M1 Files and G Files
Publication 1747 6.6 - July 1996
B–11