Procedures - Allen-Bradley 1747-SN User Manual

2–2 Quick Start for Experienced Users

Procedures

Check the contents of the shipping box.
1.
Unpack the module making sure that the contents include:
RIO Scanner (Catalog Number 1747 SN)
termination kit
user manual (Publication 1747 6.6)
If the contents are incomplete, call your local Allen Bradley representative for assistance.
Ensure your chassis supports placement of the 1747 SN module.
2.
Review the power requirements of your system to see that your chassis supports placement of the
scanner module. The scanner consumes 600 mA @ 5VDC.
For modular style systems, calculate the total load on the system power supply using the procedure
described in the SLC 500
1747 6.2, or the SLC 500
Configure the module using the DIP switches.
3.
Set the DIP switches (located on the printed circuit board) to the desired baud rate. Note that all RIO
devices must be configured for the same baud rate.
Publication 1747 6.6 - July 1996
Modular Hardware Style Installation & Operation Manual, Publication
Family System Overview, Publication 1747 2.30.
Baud Rate
57.6K baud
115.2K baud
230.4K baud
230.4K baud
DIP Switch Position
Switch 1 Switch 2
on on
on off
off on
off off
Reference
-
Reference
Chapter 3
(Installation and
Wiring)
Appendix A
(Specifications)
Reference
Chapter 3
(Installation and
Wiring)