Changing The Monitor Settings - Fujitsu Siemens Computers 463V FA Operating Manual

Siemens operating manual monitor 463v fa
Table of Contents

Advertisement

If your computer detects inactivity (no input) it sends an appropriate signal to the monitor to reduce
the power consumption (energy-saving mode). The power indicator of the monitor changes colour to
indicate the status change.
Once an input is made at the computer the screen contents are redrawn and full power is restored.
For detailed information on how energy-saving mode operates refer to the Operating Manual or
Technical Manual of the computer.
When the monitor is switched to the energy-saving mode by the power management
i
system a power consumption of up to 3 W is maintained to feed the circuit for redrawing
the screen contents.
To completely switch off the power consumption, switch off the computer or pull the plug
of the monitor power cable out of the monitor socket of the computer.

Changing the monitor settings

When putting the monitor into operation for the first time, the screen display should be optimally
adapted to the screen controller used and adjusted in accordance with your needs.
Basic monitor settings with the floppy disk supplied
If one of the operating systems Windows 95/98, Windows NT, Windows Me, Windows 2000,
Windows XP or OS/2 (with Windows emulation installed) is used, the basic monitor settings can be
set with the floppy disk supplied.
Ê
Insert the supplied floppy disk into the floppy disk drive.
Ê
Open the Readme file on the floppy disk and follow the instructions in the file.
Your monitor should now already be properly adjusted. If none of the above operating systems is
used or minor corrections are to be made to the screen display, then change the monitor settings
with the OSD menu.
Monitor settings with the buttons of the control panel
1 = Buttons for the OSD menu
(On-Screen-Display)
Use the buttons of the control panel to make the following monitor settings directly while the OSD
menu is switched off.
A26361-K864-Z100-1-5E19
+
-
MENU \
AUTO
1
Colour monitor 463V FA
INPUT
2 = Power indicator
3 = Power button
2
3
English - 11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents