Connecting Cables To The Monitor - Fujitsu Siemens Computers 463V FA Operating Manual

Colour monitor 463V FA

Connecting cables to the monitor

The monitor ports are protected by a cover.
1 = Cover
2 = Connector for the power supply
Ê
Remove the cover (1).
The data cables provided have plugs for the D-SUB connector or the DVI-D connector on the
monitor.
Ê
Select the suitable data cable for your computer.
Digital graphics card with DVI interface:
Graphics card with VGA interface:
Information on the computer connections and interfaces is contained in the operating manual for
your computer.
Ê
Connect one of the D-SUB connectors of the data cable to the D-SUB connector on the
monitor (3) and secure the plug-in connection by tightening the safety screws.
If you want to use the data cable with DVI-D connector or if you want to connect the
i
monitor to a second computer, proceed as follows:
Ê
Connect the DVI-D connector of the data cable to the DVI-D connector on the
monitor (4) and secure the plug-in connection by tightening the safety screws.
After switching on the monitor you must select the desired input with the OSD menu (Input
Select function, see "Changing the monitor settings" chapter).
Ê
Plug the power adapter cable into the power connector (2) of the monitor.
Ê
Firmly insert the socket with the power cable supplied into the power cable connection of the
power adapter and check whether the socket is securely seated.
8 - English
1
2 3
3 = D-SUB connector (ANALOG)
4 = DVI-D connector (DIGITAL)
DVI connector
D-SUB connector
4
A26361-K864-Z100-1-5E19