Fujitsu Siemens Computers 463V FA Operating Manual page 30

Colour monitor 463V FA
Having this problem?
No display (power indicator lights)
Picture position is not correct
Picture is shaking
22 - English
Check the following points:
Ê
Check whether the computer is switched
on.
Ê
Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
Ê
Press any key on the computer keyboard –
the computer may be in energy saving
mode.
Ê
Alter the brightness and/or contrast until
you get a picture.
Ê
Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
Ê
Check whether the computer is switched
on.
The input signal (horizontal frequency and
refresh rate) at the displayed input does not
correspond to the technical monitor data.
Ê
Adjust the video frequency range using the
computer software (see documentation for
your computer or your graphics card).
The monitor recognises an undefined mode (see
"Technical data").
Ê
Press the AUTO \ AUTO button to perform
the auto-adjustment of the screen.
Ê
Set the picture position with the OSD menu
(see "Operation of the monitor").
Ê
Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
A26361-K864-Z100-1-5E19