Fujitsu Siemens Computers 463V FA Operating Manual page 21

To set the OSD menu, perform the following steps:
Ê
Briefly press the MENU \ AUTO button to activate the OSD menu.
The main menu appears on the screen with icons for the setting functions.
The corresponding setting window (here: Manual Image Adjust) is displayed.
All changes are stored automatically.
If you want to change other settings, select the corresponding function from the OSD main menu. All
possible adjustments of the main menu are described in the following.
The OSD menu for analogue monitor operation is described in the following. During digital
i
operation some functions are not available, as they are not required due to the digital
transmission technology used.
A26361-K864-Z100-1-5E19
Colour monitor 463V FA
The first symbol (Auto Image Adjust) is
highlighted. At the bottom of the OSD menu
each button's function is displayed.
Ê
Press the - or + button to highlight another
icon if necessary (e.g. Manual Image Adjust).
Ê
Press the INPUT button to select the
highlighted icon.
The first symbol (H. / V. Position) is highlighted.
Ê
If necessary, press the - or + button to mark
the next icon.
Ê
Press the INPUT button to select the
highlighted icon.
The icon's colour changes.
Ê
Press the - or + button to adjust the
selected function.
Ê
Press the MENU \ AUTO button to save the
settings.
The icon's colour changes.
Ê
Press the - or + button to mark another
symbol or press the MENU \ AUTO button
to return to the main menu.
English - 13