Declaration Of Conformity; Power Cable - Fujitsu Siemens Computers 463V FA Operating Manual

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Product Name:
Trade Name:
Model Number(s):
Name of Responsible Party:
Contact Person:
Phone No.:
Fax No.:

Power cable

To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary
to replace the original cable set.
·
The female/male receptacles of the cord set must meet CEE-22 requirements.
·
The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the
outer sheath or on the insulation of one of the inner conductors.
·
For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used.
For devices which sit on the floor, only SJT type cable sets may be used.
·
The cable set must be selected according to the rated current for your device.
Power cable for devices distributed in the US and Canada
In the United States and Canada the cord set must also be UL-listed and CSA-labelled. The voltage
rating should be min. 250 volts a.c.
Please consult the following table for the selection criteria for power cables used in the United
States and Canada.
Cable type
SJT
SVT
A26361-K864-Z100-1-5E19
LCD Monitor
Fujitsu Siemens Computers
463V FA
Fujitsu Siemens Computers Inc.
598 Gibraltar Drive
Milpitas, CA 95035-6315
U.S.A.
Reiner Johannis
(408) 571-6051
(408) 571-6196
Size of conductors in cable
18 AWG
16 AWG
14 AWG
18 AWG
17 AWG
Colour monitor 463V FA
Maximum current rating of the device
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
English - 5