Steam Smoothing; Short; Stains; Further Options - Miele WMR 861 WPS Operating Instructions Manual

Extra options
Steam smoothing 
Steam is injected into the drum at the
end of the wash process. Reducing the
maximum load by 50% will give a better
result. For steam smoothing to work
properly there needs to be a certain
amount of residual moisture still present
in the laundry. The final spin speed is
therefore adjusted accordingly.
The garments must be suitable for
drying in a tumble dryer   and
suitable for ironing  .

Short

For light soiling with no visible staining.
The wash duration is reduced.

Stains

In order to clean stained laundry more
effectively, you can choose from a list
of various types of stains. The wash
programme will then adapt to the types
of stains selected. You can select a
maximum of three stains per wash
cycle.

Further options

Soak
For heavily soiled and stained items
with protein stains.
A duration of between 30 minutes and 5
hours can be chosen for the soak
process in 30-minute increments. See
"Settings" for more information.
The factory default setting is 30
minutes.
50

Rinse hold

The laundry is not spun after the final
rinse and remains in the final rinse
water. This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.

Pre-wash

For laundry with large amounts of dirt,
e.g. dust and sand.

Water plus

The water level in the main wash and
the rinses will be increased if the Water
plus Extra option is selected.
You can select by how much the water
level is increased (see "Settings - Water
plus level").

Extra rinse

An additional rinse cycle can be carried
out to give a better rinse result.