There are several options for adding
detergent.
TwinDos
Before using TwinDos for the first time,
the display will show information about
the factory default settings for TwinDos.
The following will appear in the display:
Parameters for UltraPhase 1 and UltraPhase
2 are set at the factory. Dosage amounts
and detergents can be changed in
"Settings/"TwinDos"
Touch the OK sensor to confirm.
Miele 2 Phase System
UltraPhase 1 and UltraPhase 2 need to
be dispensed in different ratios
depending on the colour mix of the
laundry load.
Press the Dos sensor.
Select agent
For white items
For coloured items
Back
Use the and sensors to select
the colour mix of the laundry and
confirm with the OK sensor.
UltraPhase 1 and UltraPhase 2 will be
dispensed accordingly.
5. Adding detergent
Liquid detergent/Fabric softener
It is possible to use other types of liquid
detergent/fabric softener. Refillable
TwinDos containers (optional
accessories) are required for this.
The washing machine's electronic
settings need to be adjusted
accordingly. See "Settings - TwinDos".
Press the Dos sensor.
Select agent
Both agents
Back
Miele UltraColor
Confirm the option displayed with the
OK sensor or select another
detergent or fabric softener with the
and sensors.
Useful tip: The recommended
detergent(s) is shown in the display and
marked with a tick ().
Detergent and/or fabric softener will
now be dispensed in accordance with
the wash cycle.
Adding stain remover
There are two options for adding stain
remover in addition to using the
automatic dispensing system:
– Use the Booster cap.
– Add the stain remover to the
compartment.
29