Adding Or Removing Laundry After A Programme Has Started - Miele WMR 861 WPS Operating Instructions Manual

Adding or removing laundry
after a programme has started
 Press the Start/Stop button.
The following will appear in the display:
Selection
Cancel programme
Add laundry
Save as a Favourite programme
 Scroll up the list with the  or 
sensor to:
Selection
Add laundry
Save as a Favourite programme
Activate safety lock
 Touch the OK sensor.
If this message does not appear in the
display, then it is no longer possible to
add or remove items of laundry.
The programme will stop and the door
will unlock.
 Pull open the door.
 Add or remove items.
 Close the door.
 Press the Start/Stop button.
The programme will continue.
Changing the programme sequence
Please note the following:
Once a programme has started, the
washing machine cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the

programme cycle assuming a full load.

The door cannot be opened if:
– the suds temperature is above 55°C.
– the water is above a certain level.
– the programme has reached the Spin
stage.
 

If you want to open the door when the
above conditions are present, you will
need to cancel the programme.
The door lock will remain activated if
the temperature in the drum is above
55°C. The lock will not deactivate until
the temperature has dropped to below
55°C.
59