Remove The Removable Terminal Block From The Module; Remove The Module - Allen-Bradley ControlLogix 1756-IF6CIS Installation Instructions Manual

16 ControlLogix™ Sourcing Current Loop Input Module

Remove the Removable Terminal Block from the Module

If you need to remove the module, you must remove the RTB first.
When you insert or remove the module while backplane
WARNING
power is on, an electrical arc can occur. This could cause
!
an explosion in hazardous location installations. Be sure
that power is removed or the area is nonhazardous
before proceeding.
Before removing the module, you must remove the RTB.
1. Unlock the locking tab at
the top of the module.

Remove the Module

1. Push in top and bottom locking tabs.
Publication
1756-IN579A-EN-P - March 2003
2. Open the RTB door and pull
the RTB off the module.
42517
2. Pull module out of the chassis.
20856–M
20855–M
20857–M