Table of Contents
Advertisement
ControlLogix 90-140V DC Sequence of Events Input Module 13
Remove the Removable Terminal Block from the Module
If you need to remove the module, you must remove the RTB first.
When you insert or remove the module while backplane
WARNING
power is on, an electrical arc can occur. This could cause
an explosion in hazardous location installations. Be sure
that power is removed or the area is nonhazardous
before proceeding.
Before removing the module, you must remove the RTB.
1. Unlock the locking tab at
the top of the module.
Remove the Module
1. Push in top and bottom locking tabs.
2. Open the RTB door and pull
the RTB off the module.
42517
2. Pull module out of the chassis.
20856–M
Publication
AB Driv
1756-IN592A-EN-P - March 2004
20855–M
20857–M
Advertisement
Table of Contents
