Allen-Bradley ControlLogix 1756-IF6CIS Installation Instructions Manual page 2

2 ControlLogix™ Sourcing Current Loop Input Module
Important User Information
Because of the variety of uses for the products described in this publication, those
responsible for the application and use of these products must satisfy themselves that all
necessary steps have been taken to assure that each application and use meets all
performance and safety requirements, including any applicable laws, regulations, codes and
standards. In no event will Rockwell Automation be responsible or liable for indirect or
consequential damage resulting from the use or application of these products.
Any illustrations, charts, sample programs, and layout examples shown in this publication
are intended solely for purposes of example. Since there are many variables and
requirements associated with any particular installation, Rockwell Automation does not
assume responsibility or liability (to include intellectual property liability) for actual use
based upon the examples shown in this publication.
Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application, Installation and
Maintenance of Solid-State Control (available from your local Rockwell Automation office),
describes some important differences between solid-state equipment and electromechanical
devices that should be taken into consideration when applying products such as those
described in this publication.
Reproduction of the contents of this copyrighted publication, in whole or part, without
written permission of Rockwell Automation, is prohibited.
Throughout this publication, notes may be used to make you aware of safety considerations.
The following annotations and their accompanying statements help you to identify a
potential hazard, avoid a potential hazard, and recognize the consequences of a potential
hazard:
WARNING
Identifies information about practices or circumstances that can cause an
!
explosion in a hazardous environment, which may lead to personal injury or
death, property damage, or economic loss.
ATTENTION
Identifies information about practices or circumstances that can lead to
!
personal injury or death, property damage, or economic loss.
Identifies information that is critical for successful application and
IMPORTANT
understanding of the product.
ControlLogix is a trademark of Rockwell Automation, Inc.
Publication
1756-IN579A-EN-P - March 2003