Allen-Bradley ControlLogix 1756-OV32E Installation Instructions Manual page 2

2 ControlLogix DC (10-30V) Electronically-Fused Sinking Current Output Module
Important User Information
Solid state equipment has operational characteristics differing from those of
electromechanical equipment. Safety Guidelines for the Application, Installation and
Maintenance of Solid State Controls (Publication SGI-1.1 available from your local Rockwell
Automation sales office or online at http://www.ab.com/manuals/gi) describes some
important differences between solid state equipment and hard-wired electromechanical
devices. Because of this difference, and also because of the wide variety of uses for solid
state equipment, all persons responsible for applying this equipment must satisfy
themselves that each intended application of this equipment is acceptable.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or
consequential damages resulting from the use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes.
Because of the many variables and requirements associated with any particular installation,
Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on
the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of
information, circuits, equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission
of Rockwell Automation, Inc. is prohibited.
Throughout this manual we use notes to make you aware of safety considerations.
Identifies information about practices or circumstances that can cause an
WARNING
explosion in a hazardous environment, which may lead to personal injury or
!
death, property damage, or economic loss.
Identifies information about practices or circumstances that can lead to personal
ATTENTION
injury or death, property damage, or economic loss. Attentions help you:
!
Identifies information that is critical for successful application and
IMPORTANT
understanding of the product.
Labels may be located on or inside the drive to alert people that dangerous
SHOCK HAZARD
voltage may be present.
Publication
1756-IN582A-EN-P - August 2003
• identify a hazard
• avoid a hazard
• recognize the consequence