ControlLogix DC (10-30V) Electronically-Fused Sinking Current Output Module 13
Remove the Removable Terminal Block from the Module
If you need to remove the module, you must remove the RTB first.
When you insert or remove the module while backplane
WARNING
power is on, an electrical arc can occur. This could cause
!
an explosion in hazardous location installations. Be sure
that power is removed or the area is nonhazardous
before proceeding.
Before removing the module, you must remove the RTB.
1. Unlock the locking tab at
the top of the module.
Remove the Module
1. Push in top and bottom locking tabs.
2. Open the RTB door and pull
42517
20856–M
Allen-Bradle
Publication
the RTB off the module.
2. Pull module out of the chassis.
1756-IN582A-EN-P - August 2003
20855–M
20857–M