Rtd Compatibility - Allen-Bradley Compact 1769-IR6 User Manual

1-2 Overview
Publication 1769-UM005A-EN-P
The following data formats are supported by the module.:
• raw/proportional
• engineering units x 1
• engineering units x 10
• scaled-for-PID
• percent full scale
Available filter frequencies are:
• 10 Hz
• 50 Hz
• 60 Hz
• 250 Hz
• 500 Hz
• 1 kHz
The module uses eight input words for data and status bits and seven
configuration words. Module configuration is stored in the controller
memory. Normally configuration is done via the controller's programming
software. In addition, some controllers support configuration via the user
program. Refer to your controller manual for additional information. See
Chapter 4, Module Data, Status, and Channel Configuration, for details
on module configuration.

RTD Compatibility

An RTD consists of a temperature-sensing element connected by two,
three, or four wires that provide input to the module. The following table
lists the RTD types that you can use with the module, including their
temperature range, effective resolution, and repeatability for both
excitation currents, 0.5 and 1.0 mA.