Allen-Bradley MicroLogix 1200 Installation Instructions Manual page 15

Type/Range Select (Bits 11 through 8)
These bits indicate the type and range as in the following table. Other combinations of these
bits are not supported and result in an error.
Bit Settings
11 10
0 0
0 0
other
Configuration via RSLogix 500
The module can be configured using RSLogix 500 programming software, as shown below.
MicroLogix™ 1200 Analog Output Module
9 8
0 0
1 1
AB Spares
Data Format
Voltage Mode 0 to 10V dc
Current Mode 4 to 20 mA
Not Supported
Publication 1762-IN016A-EN-P - July 2003
15