Maintenance; Specifications - Maxtec UltraMaxO2 Operating Manual & Instructions For Use

6.2 Maintenance

Replace the batteries with high quality AA Alkaline or Lithium batteries. DO NOT use
rechargeable batteries.
• When not in use for periods greater than 30 days, remove the batteries to protect
the UltraMaxO
• Store the UltraMaxO

7.0 SPECIFICATIONS

OXYGEN
Oxygen Measurement Range:
(from a concentrator)
Oxygen Measurement Accuracy:
Oxygen Measurement Resolution:
FLOW
Flow Measurement Range:
Flow Measurement Accuracy:
Flow Measurement Resolution:
PRESSURE
Pressure Measurement Range:
Pressure Measurement Accuracy:
Pressure Measurement Resolution:
Response Time:
Warm-up Time:
Operating Temperature:
Storage Temperature:
Pressure:
Humidity:
Power Requirements:
Battery Life:
Low Battery Indication:
Dimensions:
Weight:
*See section 3.4 (pg. 4) of this operating manual for information on the effects of low flow.
6
from potential battery leakage.
2
between -15˚C and 60˚C (5˚F - 140˚F)
2
866.4.Maxtec
20.9 - 96%
±1.5 % of full scale at
constant temperature and optimal flow*
0.1% Oxygen
0 - 10 LPM
±0.2 LPM
0.1 LPM
PSI
0.5 - 50
±0.5%
0.1
≤17 seconds
< 1 second
15˚C - 40˚C (59˚F-104˚F)
-15˚C - 60˚C (5˚F-140˚F)
800 - 1000 mBars
0 - 95% (non-condensing)
2 AA Alkaline batteries (2 x 1.5 Volts)
≥ 1,100 hours (16,500 read cycles)
"Low Battery" icon displayed on LCD
3.16" x 5.10" x 1.04"
[80.3mm x 129.5mm x 26.4mm]
0.4 lbs (181 g)
www.maxtecinc.com
kPa
3.4 - 344
±0.5%
0.1 up to 199,
1 from 200 to 344