CSA STD C22.2 No. 60601-1 NOTE: The latest edition of this operating manual can be downloaded from our website at www.maxtec.com NOTE: The UltraMax O2 is for use only by trained personnel. Before use, all individuals using DO NOT use the UltraMax O2 for continuous oxygen monitoring.
E05: Pressure measurement out of Range Hi (≥50 PSI). Recommended Action: Check the pres- 3. Flow 2-5 LPM of gas into the UltraMax O2. Ensure that the gas flowing to the sure on a known gas source pressure. If error code repeats; contact Maxtec Customer Service. UltraMax O2 is at a stable temperature.
8.2 Optional Accessories PART NUMBER ITEM R221P15 Soft Cover Repair of this equipment must be performed by a qualified service technician experienced in repair of portable hand held medical equipment. WWW.MAXTEC.COM • (800) 748-5355 ENGLISH...
Page 6
RF compliance level above, the equipment should be observed to verify normal operation. If d=1.2/V1] √P d=1.2/V1] √P d=2.3 √P abnormal performance is observed, additional measures may be necessary, such as reorient- 0.01 0.12 0.12 0.23 ing or relocating the equipment. 0.38 0.38 0.73 ENGLISH WWW.MAXTEC.COM • (800) 748-5355...
Need help?
Do you have a question about the UltraMax O2 and is the answer not in the manual?
Questions and answers