Call Setup - Siemens C60 User Manual

68 Setup

Call setup

¢ m ¢
§Menu§
¢
Select a function.
Hide ID
When you make a call, your phone
number can be displayed on the
recipient's display (depending on the
service providers).
To suppress this display, you can
enable the "Hide ID" mode for all sub-
sequent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Call waiting
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it (see
also p. 23).
Any to answer
Incoming calls can be accepted by
pressing any key
B
(except for
Minute beep
During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The recipient does
not hear this beep.
Call setup
).
Car Kit
Only in combination with an original
Siemens handsfree Car Kit (p. 95). If
an original Siemens Car Kit Portable
b is used the profile is activated auto-
matically as soon as the phone is
inserted into the cradle.
Auto answer
(factory default: off)
Calls are accepted automatically
after a few seconds. Eavesdropping
is possible!
±
Auto phone off
(factory default: 2 hours)
b
The phone is powered by the car.
The time taken for the phone to
switch off when the ignition is
turned off can be configured.
Car loudspeaker
Select another audio setting as
needed for your car kit for better
acoustics.
Automatic settings:
• Permanent illumination:
switched on.
• Key lock: switched off.
• Charging the phone battery.
• Automatic activation of the Car Kit
profile when phone is inserted in
cradle.
Shown on the display.