Call Setup - Siemens A65 User Manual

left page (20) of A65_PUMA en, A31008-H5810-A1-1-7619 (22.07.2004, 13:32)
Setup
20

Call setup

¢
§Menu§
¢
m
Select a function
Hide ID
When switched on, the display of the call-
ing party shows your phone number (de-
pendent on service provider).
Call waiting
If you are registered for this service, you
can check whether it is set and you can
activate/deactivate it with
Divert
You can set the conditions for which calls
are diverted to your mailbox or other
numbers.
Set up call divert (example):
• All calls
All calls are diverted.
top line of the display in standby mode.
• Unanswered
Includes Unanswered,
No reply, Busy.
¢
Set
§Select§
number, to which the call should be
¢
diverted)
After a short pause, the setting is con-
firmed by the network.
Other divert options:
No reply, Busy
• Status check
After a short pause the current informa-
tion is shown.
Condition set.
p
Not set.
o
Display if status is unknown
s
(e. g. with a new SIM card).
• Clear all
All set diversions are cleared.
¢
Call setup
Call waiting.
is shown in the
n
Not reachable,
¢
(Enter the phone
J
§OK§
Not reachable,
Any to answer
Incoming calls can be accepted by press-
ing any key
B
(except for
b
Minute beep
During the call, you will hear a beep after
each minute as a reminder of the time
elapsed. The recipient does not hear this
b
beep.
).