Making A Phone Call; Dialling With Number Keys; End Call; Set Volume - Siemens C60 User Manual

20

Making a phone call

Making a phone call
Dialling with number
keys
The phone must be switched on
(standby mode).
J
Dial number (always with
area code, if necessary
with international dialling
code).
§Clear§
the last digit, a long press
clears the entire phone
number.
A
Press the Call key. The
phone number displayed
is dialled.

End call

B
Press the End key briefly.
The call is ended. Press
this key even if the person
on the other end of the
line has hung up first.

Set volume

E
Use the control key (top)
to start adjusting the vol-
ume during conversation.
G
Set volume and confirm
with §OK§.
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
A short press clears

Redial previous numbers

To redial the phone number last
called:
A
Press the Call key twice.
To redial other numbers that were
dialled previously:
A
Press the Call key once.
G
Pick out the required
phone number from the
A
list, then press ...
Press ...
Send control code
(DTMF)
You can, for example, enter control
codes (numbers) for remote access
to an automatic answering machine
while another connection exists.
These entries are transmitted
directly as DTMF codes (control
codes).
Open the call menu.
y menu§
Send DTMF
Select.