Security - Siemens C60 User Manual

74 Setup

Security

¢ m ¢
§Menu§
¢
Select a function
The phone and SIM card are pro-
tected against misuse by several
security codes.
Direct call
(Phone code is protected)
Only one phone number can be
dialled. Hold down the right soft key
(p. 25).
Only
‚
(PIN2-protected)
Restricts dialing options to SIM-pro-
tected numbers in the Phonebook. If
only area codes are entered, relevant
phone numbers can be added to
these manually before dialling.
If the SIM card does not support PIN
2 input, the whole Phonebook can be
protected with the phone code.
Last 10 only
(Phone-code protected)
Only phone numbers from the call
list of "dialled numbers" (p. 37) can
be dialled. This list can be filled with
phone numbers specifically for this
purpose.
First delete the call list, then create
"new entries" by dialling phone num-
bers and cancelling before the con-
nection is established.
Security
b
b
¢ m ¢
§Menu§
¢
Select a function
Codes
PIN control, Change PIN, Change PIN2,
Change phonecode, (p. 17).
This SIM only
(Phone-code protected)
The phone can be connected to a
SIM card when the phone code is
entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
Barrings
Barring restricts the use of your SIM
card (not supported by all service
providers). You need a 4-digit pass-
word which your service provider
will give you. You may need to be
registered separately for each bar-
ring.
All outgoing
All outgoing calls, except emergency
calls, are blocked.
Outgo internat
(Outgoing international)
Only domestic calls are possible.
Security
b
b