Call Setup - Siemens A60 Short Operating Instructions

of A60 LionLite, kurz us, A31008-H5850-A1-1-7619 (15.10.03)
left page (39)
39 Setup

Call setup

¢ m ¢
§Menu§
¢
Hide ID
When switched on, the display of the
calling party shows your phone num-
ber (dependent on service provider).
Call waiting
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it
waiting.
Any to answer
Incoming calls can be accepted by
pressing any key
B
(except for
Minute beep
During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The recipient does
not hear this beep.
Car Kit
Only in combination with an original
Siemens Speakerphone Car Kit. If an
original Siemens Car Kit Portable is
used the profile is activated auto-
matically as soon as the phone is
inserted into the cradle.
Call setup
Select a function.
Call
).
Auto answer
Calls are accepted automatically
after a few seconds. Eavesdropping
is possible!
b Auto phone off
When powering the unit from the
car, the time taken for the phone to
switch when the ignition is turned
off can be configured.
b
Acoustic set2
Select another audio setting as
needed for your car kit for better
acoustics.
Headset
Only in conjunction with an original
Siemens headset. If an original
Siemens Headset is used the profile
is automatically activated when the
headset is plugged in.
Accept call with the Call key or PTT
key (Push To Talk) when the key lock
is activated.
Auto answer
Calls are accepted automatically
after a few seconds. Eavesdropping
is possible!
Auto answer
If you do not notice that you phone has
accepted a call, there is the danger that the
caller may eavesdrop.