Making Ip Calls - UTStarcom UTS 700 U User Manual

700 U (C) User Manual

2.3.1 Making IP Calls

Prior to making an IP, 200, or 300 calls using the
correct number and password have been entered into the memory of the
phone.
Note:
1. Input the service number, e.g. 17908. Dial the service number,
e.g. 17980
2. Select the appropriate language. When you are asked to enter the
IP card number and password press the
will automatically send the IP card number and password stored
in memory. The numbers will scroll from right to left across the
LCD display as shown above.
3. If the call is successfully completed, follow the instructions from
your service provider.
4. To end a call or cancel the call attempt, press
• The IP card number and password must be entered into the phone
prior to using the
• To set the IP card number and password - Refer to "Entering an IP
number and Password."
key.
Basic Operations 2-3
key, make sure the
key. The phone
.