UTStarcom UTS 700 U User Manual page 8

viii Table of Contents
Handling the Charger
Use only a power source that provides the appropriate voltage
(AC240V±10% or AC110V±10%) for the charger. An unsuitable power
source can result in damaging the charger, electric shock or the risk of fire.
Do not short circuit the charger connector jack. This may result in the risk of
fire or electric shock.
Do not use the charger if the power supply cord or plug is damaged or frayed
(exposed or broken wires, etc). This can result in the risk of fire or electric
shock
Unplug the charger from the outlet before cleaning. Do not use liquid or
aerosols cleaners. Use a damp cloth for cleaning to wipe off any accumulated
dust to prevent any chance of fire.
Never spill any liquid on the charger. This may result in the risk of fire or
electric shock.
Unplug the charger immediately from the wall outlet if liquid has been
spilled into the unit to prevent the risk of fire or electric shock.
Do not use the charger in areas with high humidity, such as bathrooms or the
like. This may result in malfunction, electric shock or the risk of fire.
Do not touch the charger power cord or wall outlet with wet hands. This may
result in the risk of fire or electric shock.
Always unplug the charger from the wall outlet before cleaning to avoid the
risk of electric shock.
Do not place objects on the power cord. Install the charger where no one can
step or trip on the power cord.
700 U (C) User Manual