Control Box Operation - Culligan ClearLink Pro Installation And Operating Instructions Manual

BUT TON DISPLAY GUIDE

CONTROL BOX OPERATION

RESET
REPLACE BATTERIES
POWER
REPLACE FILTERS
Filter Capacity Lights: Shows from 1-6 lights
depending on filter capacity remaining,
6 lights = >80% and 1 light = <10%.
Culligan Logo: Flashes when treated water is not
available from the faucet. Stays solid while treated
water is being dispensed from the faucet.
Alert Indicator: Illuminates when the control box
batteries need replacing or filters need replacing.
Reset button for filter capacity.
Power: Flashes green at power up, filter capacity
reset, and while dispensing filtered water. Continues
to flash for minute after the flow of filtered water
1
has stopped.
Replace Batteries: Flashes red when the batteries
for the control box need to be replaced. This indicator
automatically clears when new batteries are detected.
Replace Filters: Flashes red when the filters have
less than % of their life remaining due to flow or
10
time. This indicator is reset by pressing the reset
button for two seconds.
9