Related Manuals for SoundCraft 328 XD
Summary of Contents for SoundCraft 328 XD
- Page 1 0dBFS = 18dBu RIGHT dBFS STE-1 STE-2 STEREO INPUTS SELECT MUTE SOLO EXIT FUNCTION PARAMETER CHANNEL / GROUP LINK TASCAM DTRS...
-
Page 2: Table Of Contents
328XD AND 328XD AND 328XD AND 328XD AND TASCAM DTRS TASCAM DTRS TASCAM DTRS TASCAM DTRS Connecting the system 328XD Configuration DA78HR Configuration DA88 Configuration DA98 / DA98HR Configuration Additional Information 1 1 1 1 Soundcraft 328XD and Tascam DTRS... -
Page 3: Connecting The System
A MIDI cable must be connected from the 328XD MIDI Out to the SY-88 MIDI In and a MIDI cable must be connected from the SY-88 MIDI Out to the 328XD MIDI In. 2 2 2 2 Soundcraft 328XD and Tascam DTRS... - Page 4 DTRS Wordsync In MIDI Cables: 328XD MIDI Out DTRS MIDI In (if present) DTRS MIDI Out (if present) 328XD MIDI In Tascam TDIF Cable: 328XD 8 Track A TDIF DTRS TDIF Port 3 3 3 3 Soundcraft 328XD and Tascam DTRS...
-
Page 5: 328Xd Configuration
328XD is currently operating, whether it is configured to be a master or client wordclock device. Press the Down cursor key to set the Sample Rate Flag. Use the PARAM encoder to adjust, and press <MENU> to return to the menu pages. 4 4 4 4 Soundcraft 328XD and Tascam DTRS... - Page 6 Menu pages by pressing the <MENU> button and scroll through the menus until ‘User Setups’ is highlighted. Press <ENTER> and scroll through to find a vacant setup location. Press <STORE> in the 328XD Snapshot panel. 5 5 5 5 Soundcraft 328XD and Tascam DTRS...
-
Page 7: Da78Hr Configuration
MIDI Enables MMC and MTC DA-78HR transmits timecode when MIDI Fast MTC in fast wind mode DA-78HR transmits timecode when Stop MTC stopped 6 6 6 6 Soundcraft 328XD and Tascam DTRS... -
Page 8: Da88 Configuration
Switch 6: This switch should be set to DOWN for Timecode is to be transmitted from the DA-88 to the 328XD. For further information the Tascam SY-88 manual should be consulted. To complete the setup, turn on the 328XD again. 7 7 7 7 Soundcraft 328XD and Tascam DTRS... -
Page 9: Da98 / Da98Hr Configuration
‘enable’ and press <ENTER> to confirm and <ESCAPE> to return to the main menu page. Enter menu #5 to configure the timecode settings for the DA-98. The following submenus should be available: 8 8 8 8 Soundcraft 328XD and Tascam DTRS... - Page 10 With a DA-98HR, 24 bit wordlength can be selected. If this is set to on, 24 bit should also be set as the wordlength in the 328XD Tape Port Select menu (see page 4). 9 9 9 9 Soundcraft 328XD and Tascam DTRS...
-
Page 11: Additional Information
CRANBORNE ROAD POTTERS BAR HERTS EN6 3JN UK TEL: +44 (0) 1707 665000 FAX: +44 (0) 1707 660742 EMAIL: info@soundcraft.com SOUNDCRAFT USA 1449 DONELSON PIKE NASHVILLE TN 37217 USA TEL: 1-615-360-0471 FAX: 1-615-360-0273 EMAIL: soundcraft-usa@harman.com www.soundcraft.com Soundcraft 328XD and Tascam DTRS...