Related Manuals for SoundCraft 328 XD
Summary of Contents for SoundCraft 328 XD
- Page 1 0dBFS = 18dBu RIGHT dBFS STE-1 STE-2 STEREO INPUTS SELECT MUTE SOLO EXIT FUNCTION PARAMETER CHANNEL / GROUP LINK M-AUDIO LAGOON...
-
Page 2: Table Of Contents
328XD AND 328XD AND 328XD AND 328XD AND M-AUDIO LAGOON M-AUDIO LAGOON M-AUDIO LAGOON M-AUDIO LAGOON Connecting the system 328XD Configuration Lagoon Configuration Using the Lagoon with the 328XD Additional Information 1 1 1 1 Soundcraft 328XD and M-Audio Lagoon... -
Page 3: Connecting The System
System Exclusive dumps from the 328XD to be recorded and played back from your PC. If you wish to connect the 328XD MIDI I/O to the Lagoon, the following connections must be made: 2 2 2 2 Soundcraft 328XD and M-Audio Lagoon... -
Page 4: 328Xd Configuration
If your audio sequencer supports only 16 or 20 bit resolution, set the wordlength appropriately– check your sequencer manual for more information. Set the desired wordlength on the 328XD with the PARAM encoder. 3 3 3 3 Soundcraft 328XD and M-Audio Lagoon... - Page 5 32 should be left set to TDIF. Alternatively, the Lagoon can be connected to 328XD ADAT input and output 25-32, and Tape Port 17-24 set to TDIF. In this case, the above settings should be made to Tape Port 25-32. 4 4 4 4 Soundcraft 328XD and M-Audio Lagoon...
-
Page 6: Lagoon Configuration
To set up the Lagoon for connection to the 328XD, first click on the Lagoon Tools icon on the Windows taskbar: The Lagoon Tools application should open. Click on the ‘General’ tab. The following window should open. Set both the input and output to be ADAT format: 5 5 5 5 Soundcraft 328XD and M-Audio Lagoon... - Page 7 328XD internal clock frequency should be adjusted - see page 3. NOTE: The ‘T2S’ filter should be left unchecked as the 328XD is fitted with Toshiba optical receivers and transmitters. 6 6 6 6 Soundcraft 328XD and M-Audio Lagoon...
- Page 8 Click on the MIDI tab within the Lagoon Tools application, and enable the Lagoon MIDI input and output ports: The Lagoon MIDI input and output ports should be selected within your chosen MIDI sequencer to enable record and playback of 328XD automation data. 7 7 7 7 Soundcraft 328XD and M-Audio Lagoon...
- Page 9 If any of the error LEDs light or remain lit, check that the ADAT connections and 328XD and Lagoon Tools settings are correct. NOTE: Once the Lagoon registers no errors, the Lagoon and 328XD clocks are synchronized. The 328XD mix fader, control room and headphone output levels may be raised. 8 8 8 8 Soundcraft 328XD and M-Audio Lagoon...
-
Page 10: Using The Lagoon With The 328Xd
1-8 post-fade. NOTE: Ensure that the relevant device drivers are fully installed for the software application to correctly access the Lagoon ADAT I/O. Consult the Lagoon manual for more information. 9 9 9 9 Soundcraft 328XD and M-Audio Lagoon... -
Page 11: Additional Information
CRANBORNE ROAD POTTERS BAR HERTS EN6 3JN UK TEL: +44 (0) 1707 665000 FAX: +44 (0) 1707 660742 EMAIL: info@soundcraft.com SOUNDCRAFT USA 1449 DONELSON PIKE NASHVILLE TN 37217 USA TEL: 1-615-360-0471 FAX: 1-615-360-0273 EMAIL: soundcraft-usa@harman.com www.soundcraft.com Soundcraft 328XD and M-Audio Lagoon...