Page 1
0dBFS = 18dBu RIGHT dBFS STE-1 STE-2 STEREO INPUTS SELECT MUTE SOLO EXIT FUNCTION PARAMETER CHANNEL / GROUP LINK SOUNDSCAPE MIXTREME...
Page 2
328XD AND 328XD AND 328XD AND 328XD AND SOUNDSCAPE SOUNDSCAPE SOUNDSCAPE SOUNDSCAPE MIXTREME MIXTREME MIXTREME MIXTREME Connecting the system 328XD Configuration Mixtreme Configuration 1 1 1 1 Soundcraft 328XD and Soundscape Mixtreme...
Page 3
Mix output, 1 of 3 stereo auxilliary outputs, pairs of Group outputs or the Control Room output. The 328XD S/PDIF Input can be configured to be a digital Stereo Input or as a digital 2-Track Return. 2 2 2 2 Soundcraft 328XD and Soundscape Mixtreme...
Press the Down cursor key again and set the sample rate flag setting to the same sample rate as set in the wordclock setting above. Press the Down cursor key once more and set the '<Tape 25-32>' settings to the same settings as in the '<Tape 17-24>' pages, as described above. 3 3 3 3 Soundcraft 328XD and Soundscape Mixtreme...
Page 5
<ENTER>. Using the PARAM encoder, select the destination for the S/PDIF input, press <ENTER> to set and <MENU> to return to the menu pages. NOTE: If the S/PDIF input is not required, NOWHERE should be selected in the menu. 4 4 4 4 Soundcraft 328XD and Soundscape Mixtreme...
Page 6
Windows taskbar. Under the Settings menu, set the Host Clock to TDIF Host Clock A. Host Host NOTE: To save these settings, click on the ‘Settings’ menu and select ‘Save Settings’. 5 5 5 5 Soundcraft 328XD and Soundscape Mixtreme...
Page 7
Mixtreme card. A basic setup utilising all 16 inputs and outputs is shown below. The mixer can be fully customized depending on the required configuration - consult the Mixtreme manual for more information. 6 6 6 6 Soundcraft 328XD and Soundscape Mixtreme...