General Settings - Psm - JVC KD-SH1000 Instruction Manual

General settings — PSM
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
Enter the PSM menu (see page 4).
2
Select a PSM item.
Indications Items
Demo • On [Initial]
Display demonstration
• Off
Anime • On [Initial]
Animation
• Off
Clock H 0 – 23 (1 – 12)
Hour adjustment [Initial: 0 (0:00)]
Clock M 00 – 59
Minute adjustment [Initial: 00 (0:00)]
24H/12H • 12Hours
Time display mode • 24Hours [Initial]
CLK Adj • Auto [Initial]
Clock adjustment
• Off
Scroll 1 • Once [Initial]
*
• Auto
• Off
All manuals and user guides at all-guides.com
3
4
5
Settings, [reference page]
: Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [8].
: Cancels.
: An animation screen appears when you turn on or off the power,
change the source, and when you select an EQ, MENU, or DSP.
: Cancels.
: See also page 8 for setting.
: See also page 8 for setting.
: See also page 8 for setting.
: The built-in clock is automatically adjusted using the CT (clock
time) data in the RDS signal.
: Cancels.
: For track information: scrolls the track information once.
For RDS Radiotext: scrolls the text message continuously.
For DAB text: scrolls the detailed DAB text.
: For track information: repeats scrolling (in 5-second intervals in
between).
For RDS Radiotext: scrolls the text message continuously.
For DAB text: scrolls the detailed DAB text.
: For track information: cancels.
For RDS Radiotext: shows only the first page of the text message.
For DAB text: shows only headline if any.
Select or adjust the selected PSM item.
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
Finish the procedure.
Continued on the next page
23